Hydraulic Cylindrical Grinding Machine

1.         PMTU/1000/150/H

2.           One piece bed made of high grade cast iron casting provided with strong ribs for        

       Rigidity and a large inverted prismatic guide and wide track for the table.

3.           Center height: - 150mm

4.           Admit between center: - 1000mm (With standard centers)

5.           Main Moveable slide is hydraulically operated by reputed Hydraulic Cylinder.

6.           Range of Table Feed per minute: - 0.05 / 1.5

7.           Work head having high precision clearance adjustable Ph. Bronze Taper bush bearing having

       1 hp A.C motor with three Speeds through four Step Pulley.

8.       Wheel head having high precision clearance adjustable white metal bush bearings.

9.            Grinding wheel size: - Æ 400 ´ 40 ´ 127 mm.

10.     Manual cross feed resolution: - 0.005 on radius.

11.     Hardened and profile ground feed screw for perfect repeat accuracy.

12.     Work head and Tail stock Morse Taper: - MT –4

13.     Wheel head having 3 hp 1500 rpm, Three Phase A.C Motor.

14.     Separate hydraulic power pack unit fitted outside the machine with 24 v D.C valve but

without Enclo- 68 Oil. (Oil Tank Capacity – 45 ltr)

15.     Automatic Lubrication on main moveable slide by flow control valve.

16.     Inbuilt Electrical control penal board having all reputed component

17.     Simple coolant tank with Pump and piping.

18.     Machine is tested as per IS 2368 & ISO 2433.

19.     Total hp: - 5.16 hp.

20.     More rigid and precise lever operated Tailstock having 25 mm traverses.

21.     Turcite –B slide way coated on both moveable slides to prevent stick slip motion.

1.           PMTU/800/150CH

2.           One piece bed made of high grade cast iron casting provided with strong ribs for        

       Rigidity and a large inverted prismatic guide and wide track for the table.

3.           Center height: - 150 mm

4.           Admit between center: - 800mm.

5.           Both Moveable slides are hydraulically operated by reputed Hydraulic Cylinders.

6.           Range of Table Feed per minute: - 0.05 / 1.5.

7.           Work head having high precision clearance adjustable Ph. Bronze Taper bush bearing having

       1 hp A.C motor with three Speeds through four Step Pulley.

8.       Wheel head having high precision clearance adjustable white metal bush bearings.

9.       Grinding wheel size: - Æ 400 ´ 40 ´ 127 mm.

10.     Manual cross feed resolution: - 0.005 on radius.

11.     Hardened and profile ground feed screw for perfect repeat accuracy.

12.     Work head and Tail stock Morse Taper: - MT –4

13.     Wheel head having 3 hp 1500 rpm, Three Phase A.C Motor.

14.     Separate hydraulic power pack unit fitted outside the machine with 24 v D.C valve but

Without Enclo- 68 Oil. (Oil Tank Capacity – 45 ltr)

15.     Automatic Lubrication on main moveable slide by flow control valve.

16.     Inbuilt Electrical control penal board having all reputed components.

17.     Simple coolant tank with Pump and piping.

18.     Machine is tested as per IS 2368 & ISO 2433.

 1 of 3

19.     50 mm Rapid approach for wheel head forward and retraction.

20.     Total hp: - 5.16 hp.

21.     More rigid and precise Tailstock having 25 mm traverses.

22.     Turcite –B slide way coated on both moveable slides to prevent stick slip motion.

1.         PMTU/1250/180CH

2.           One piece bed made of high grade cast iron casting provided with strong ribs for        

       Rigidity and a large inverted prismatic guide and wide track for the table.

3.           Center height: - 180 mm

4.           Admit between center: - 1250mm.

5.           Both Moveable slides are hydraulically operated by reputed Hydraulic Cylinders.

6.           Range of Table Feed per minute: - 0.05 / 1.5.

7.           Work head having high precision clearance adjustable Ph. Bronze Taper bush bearing having

       1 hp A.C motor with three Speeds through four Step Pulley.

8.       Wheel head having high precision clearance adjustable white metal bush bearings.

9.            Grinding wheel size: - Æ 400 ´ 40 ´ 127 mm.

10.     Manual cross feed resolution: - 0.005 on radius.

11.     Hardened and profile ground feed screw for perfect repeat accuracy.

12.     Work head and Tail stock Morse Taper: - MT –4

13.     Wheel head having 3 hp 1500 rpm, Three Phase A.C Motor.

14.     Separate hydraulic power pack unit fitted outside the machine with 24 v D.C valve but

without Enclo- 68 Oil. (Oil Tank Capacity – 45 ltr)

15.     Automatic Lubrication on main moveable slide by flow control valve.

16.     Inbuilt Electrical control penal board having all reputed components.

                                                                                                                                                                1 of 3

17.     Simple coolant tank with Pump and piping.

18.     Machine is tested as per IS 2368 & ISO 2433.

19.     50 mm Rapid approach for wheel head forward and retraction.

20.     Total hp: - 5.16 hp.

21.     More rigid and precise Tailstock having 25 mm traverses.

22.     Turcite –B slide way coated on both moveable slides to prevent stick slip motion.

Model – PMTU/1500/H:  The specific requirements to be taken into consideration are: -

1.     One piece bed made of high grade cast iron casting provided with strong ribs for        

       Rigidity and a large inverted prismatic guide and wide track for the table.

2.     Center height: - 200 mm.

3.     Admit between center (With Standard centers): - 1500 mm.

4.     Both Slides are hydraulically operated by reputed Hydraulic cylinders

5.     Heavy Duty Work Head having ph. Bronze Taper bush bearing, thrust load provision having

      1 hp A.C motor with three speeds through step pulley.

6.     Wheel head having spherical clearance adjustable white metal bush bearings.

7.     Grinding wheel size: - Æ 400 ´ 40 ´ 127 mm.

8.     Hardened and ground feed screw for perfect repeat accuracy.

9.     Work head and Tail stock Morse Taper: - MT –4.

10.                        Wheel head having 3 hp and hydraulic having 1 hp A.C Motor.

11.                        Inbuilt electrical control penal board having all reputed components.

12.                        Simple coolant tank with Pump and piping.

13.                        Machine is tested as per IS 2368 & ISO 2433.

14.                        Total hp: - 5.16 hp.

15.                        More rigid and precise Tailstock having 25 mm traverses.

16.                        Manually feed resolution: - 0.005 mm on radius.

1. Turcite –B slide way coated on both moveable slides to prevent stick slip motion.
2. 50mm Rapid approach for wheel head forward & re-traction.

1. Model – PMTU/600/H
2. One piece bed made of high grade cast iron casting provided with strong ribs for        

       Rigidity and a large inverted prismatic guide and wide track for the table.

1. Center height: - 150 mm.
2. Admit between center (With Standard Center) : - 600 mm
3. Main Slide is hydraulically operated by reputed Hydraulic cylinders.
4. Heavy Duty Work Head having ph. Bronze Taper bush bearing, thrust load provision having

      1 hp A.C motor with three speeds through step pulley.

1. Wheel head having spherical clearance adjustable white metal bush bearings.
2. Grinding wheel size: - Æ 400 ´ 40 ´ 127 mm.
3. Hardened and ground feed screw for perfect repeat accuracy.
4. Work head and Tail stock Morse Taper: - MT –4.
5. Wheel head having 3 hp and hydraulic having 1 hp A.C Motor.
6. Automatic lubrication on main moveable slide by flow control valve.
7. Separate hydraulic power pack unit fitted with 24 v D.C Valve but without Enclo – 68 Oil.
8. Inbuilt electrical control penal board having all reputed components.
9. Simple coolant tank with Pump and piping.
10. Machine is tested as per IS 2368 & ISO 2433.
11. Total hp: - 5.1 hp.
12. More rigid and precise Tailstock having 25 mm traverses.
13. Manually feed resolution: - 0.005 mm on radius.
14. Turcite –B slide way coated on both moveable slides to prevent stick slip motion.

The 1500mm hydraulic cylindrical grinding machine comes as a unit for industrial application at various levels of the construction and drilling industry. Utilized for offshore drilling operations, our machine is extremely reliable in all of its construct and performance delivery. Additionally, we insure a promising customization on the machine along the lines of industrial requirements.